Species Study - Taxodium distichum

The paste is to seal cuts? Of course! I'm experiencing some compresive dificulties. I did once slice all along a branch before wiring down. Those wires I had to to secure guy wires under the buttress roots are now fused. I'm going to need pliers. Maybe I should leave them?
I usually try to take them out but if the fuse is solid and removing will cause more damage, I will leave it.
 
I usually try to take them out but if the fuse is solid and removing will cause more damage, I will leave it.
Will do. And now that its raised up they are more unsightly. I had to pick around to get them under there in the first place. I have now cut off some of the little roots I exposed and some larger ones. Theres some big ones close to the trunk I'll look into later? I notice you dont have these "elbows" propping out? It could be environmental? But my Montezuma ones are together in very shallow pots (one forest is on a slab) and its even more pronounced. I'm thinking in the long run they should be removed? When possible.
 
Will do. And now that its raised up they are more unsightly. I had to pick around to get them under there in the first place. I have now cut off some of the little roots I exposed and some larger ones. Theres some big ones close to the trunk I'll look into later? I notice you dont have these "elbows" propping out? It could be environmental? But my Montezuma ones are together in very shallow pots (one forest is on a slab) and its even more pronounced. I'm thinking in the long run they should be removed? When possible.
If you check pictures of BCs by established people such as @johng, @BillsBayou etc., you rarely find any of those “elbows”. Their BCs have well managed root balls. The elbows form when the trees are in deep narrow pots and are buried too deep, resulting in multi-tiered root balls.
 
If you check pictures of BCs by established people such as @johng, @BillsBayou etc., you rarely find any of those “elbows”. Their BCs have well managed root balls. The elbows form when the trees are in deep narrow pots and are buried too deep, resulting in multi-tiered root balls.
Yep I figure. I have watched some of that. I am limited with my approach. Thanks so much for all help. Would you carve them off now? Clear the surface then plant moss? Not with the montezuma ones they're in there real sturdy and that might constitute half the trees. I've been fooling around a while and in need of downsizing. I need someone to take over the mantle and take all these cuttings over properly.
 
Yep I figure. I have watched some of that. I am limited with my approach. Thanks so much for all help. Would you carve them off now? Clear the surface then plant moss? Not with the montezuma ones they're in there real sturdy and that might constitute half the trees. I've been fooling around a while and in need of downsizing. I need someone to take over the mantle and take all these cuttings over properly.
I would not do any thing now and wait til spring.
 
Has anyone had their leaves change in Texas? All my BC are still green, temperatures have still been really high. Last year they were dormant for like a week, two weeks most, I wonder if that has any negative effects on them since they're not dormant as long.
 
Has anyone had their leaves change in Texas? All my BC are still green, temperatures have still been really high. Last year they were dormant for like a week, two weeks most, I wonder if that has any negative effects on them since they're not dormant as long.
I am in 9a. Two weeks ago we had a big drop in temperature and the leaves changed. We are back in high temp and they are budding again!!! So now I have brown leaves with bright green tips.
 
I am in 9a. Two weeks ago we had a big drop in temperature and the leaves changed. We are back in high temp and they are budding again!!! So now I have brown leaves with bright green tips.
Wow, 9a as well, are you taking any precautions for hard freezes now that they're budding?
 
Found this on Mirai... listening to it today.

 
It seems like folks are starting to work on their BCs. I have always waited until mid-Feb as the buds start to push out. Is there an advantage to doing it this early?

I am certainly no BC-pro, not by any means. I only own a couple.
 
It seems like folks are starting to work on their BCs. I have always waited until mid-Feb as the buds start to push out. Is there an advantage to doing it this early?

I am certainly no BC-pro, not by any means. I only own a couple.
I usually do my major bend on large branches before bud breaks to avoid damaging the tender buds with the heavy bending. The smaller branches that can be brittle in wintertime are left alone until spring.
 
Interesting, it was always my understanding that work on a tree which may cause damage, if performed during dormancy, could open it up to infection or die-back if it wasn't in an active stage of growth. That is was preferable to allow the tree to heal immediately after it is worked to mitigate the risk of that.

That being said, BC are incredibly robust and certainly not susceptible to fungal issues.
 
Interesting, it was always my understanding that work on a tree which may cause damage, if performed during dormancy, could open it up to infection or die-back if it wasn't in an active stage of growth. That is was preferable to allow the tree to heal immediately after it is worked to mitigate the risk of that.

That being said, BC are incredibly robust and certainly not susceptible to fungal issues.
I probably won’t do that in zone 7. Here in zone 9, where winter is so short, I will work on a BC in January/February.
 
Back
Top Bottom