I went away for the first extended trip I’ve had that my wife and daughter were also not home for to help with watering. I rigged up an irrigation system using a hose timer and some 3/8 tubing that I drilled holes in that I tested and worked really well. Thought I was going to be able to set and forget and check in here and there on the backyard camera. A couple days in so far so good. I started noticing though that the ground around the bench wasn’t wet like it should’ve been when I would check up. I monitored throughout the next day (the hottest of the year thus far amid the hottest week) and to my dismay realized the system did not seem to be working at all. I spent the next long travel day worried about what I would find when I got home. I was supposed to go away for the weekend straight from the airport but I had to take the time to stop home and see what happened. Unfortunately, my fears were realized. The compression nut on the adapter from the hose to the 3/8 line failed at some point during the week, severing the connection and leaving the hose watering my deck multiple times a day. I set up a simple sprinkler on the timer and left which worked fine but my question now is this.
Thankfully, at this point it seems like everything has pulled through to varying degrees. None of my conifers seem to have had any issues (and my crassula of course seemed to love it). My deciduous trees on the other hand did not fare so well. Silver maple is alive but foliage is almost entirely burned out and the two outer bend branches I was encouraging seem like they may have completely died. Crabapple just has some crispy leaves at the end of most branches. My Elm I pulled out of a bush a couple months ago that survived the transition is definitely a fighter. It got to this point after an early summer pull out of the ground only to be waylaid like this. What should I do from here? Defoliate dead leaves? The maple is already budding further back so although my plan was to just let it grow this year maybe this is an opportunity to trim back a little bit and reign the structure in. Otherwise just thinking I may remove the dead leaves on the crabapple and elm and see what happens.
I’m thankful they are alive but disappointed in the setback and all the effort I put into setting up the irrigation system being dashed by a weak compression nut. Thinking I will try to rig something with a push fit up that won’t fail as easily.
Thankfully, at this point it seems like everything has pulled through to varying degrees. None of my conifers seem to have had any issues (and my crassula of course seemed to love it). My deciduous trees on the other hand did not fare so well. Silver maple is alive but foliage is almost entirely burned out and the two outer bend branches I was encouraging seem like they may have completely died. Crabapple just has some crispy leaves at the end of most branches. My Elm I pulled out of a bush a couple months ago that survived the transition is definitely a fighter. It got to this point after an early summer pull out of the ground only to be waylaid like this. What should I do from here? Defoliate dead leaves? The maple is already budding further back so although my plan was to just let it grow this year maybe this is an opportunity to trim back a little bit and reign the structure in. Otherwise just thinking I may remove the dead leaves on the crabapple and elm and see what happens.
I’m thankful they are alive but disappointed in the setback and all the effort I put into setting up the irrigation system being dashed by a weak compression nut. Thinking I will try to rig something with a push fit up that won’t fail as easily.