In line fertilizer / feeder hose

BonjourBonsai

Chumono
Messages
696
Reaction score
764
Location
Maryland, USA
USDA Zone
7a
I'm thinking ahead to watering. I'd like to feed with diluted miracle grow weekly in the growing season. I use a hose with a watering wand with this Dramm diffuser: Dramm 074994324268 11000 1000PL 11 GPM Plastic Water Breaker Nozzle, Chrome https://a.co/d/3KlkrCd

I'm thinking of adding this. Anyone have experience with it?

Chapin International G405 Feeder Hose End for Dry and Water Soluble Fertilizers https://a.co/d/9UdkLWi
 
Last edited:
I’m sure it would work, looks like you need to adapt back to GHT to get to your wand. They make other inline siphoned systems that can drop into a bucket, etc.

I might also be concerned of salt build up in the nozzle head given how fine the holes are on the red Dramm head. That could be rectified with cleaning, just something to think about
 
I’m sure it would work, looks like you need to adapt back to GHT to get to your wand. They make other inline siphoned systems that can drop into a bucket, etc.

I might also be concerned of salt build up in the nozzle head given how fine the holes are on the red Dramm head. That could be rectified with cleaning, just something to think about
I hadn't thought of the salt build up. I'll keep an eye on that.
 
I have used this for the last 2 seasons with the same Dramm you bought, it works great.
Dramm 22625 Syphonject Siphon Mixer with External Check Valve https://a.co/d/6i9w3Xb
Does it allow you to regulate the mixture? From the description on Amazon it looks like it's a 20:1 ratio. How do you prepare your dilution?
 
You will want to add a filter to the suction tube and a weight to hold the tube and filter at the bottom of the bucket. I also “upgraded” the check valve and suction hose. The water pressure and your hose diameter will determine how much solution is being drawn from your solution bucket . I use a 3/4 garden hose and I usually mix about 6 tablespoons of Jacks 20-20-20 into a 12qt bucket.. You can dial it in to get the mixture right. In the beginning , I would fill a clear cup with the water/solution mixture to make sure the color of the final mixture was a faint blue, before I begin watering.
 
Back
Top Bottom