How to increase water pressure for the garden hose.

V

vp999

Masterpiece
Messages
2,124
Reaction score
4,373
Location
Washington DC
USDA Zone
7A
So..I've been using the Drama red nozzle and I like it but once I put in a water filter to reduce chlorine and such from the city and the water pressure reduced greatly and that caused the Drama droplets much heavier. Is there anything I can buy to increase the pressure besides removing the water filter ? Thanks
 
Yep, you don't need the filter. I am on a public water system with water that has chlorine in it. My trees get watered with that water for the past 10 plus years. I don't have any chlorine filter whatsoever never had a problem because of chlorine.

And no, you can't increase the pressure unless you add a pump to do so and I am not even sure how that would work since you aren't increasing delivery volumes / flow or pressure of the incoming water.
 
vp999 said:
So..I've been using the Drama red nozzle and I like it but once I put in a water filter to reduce chlorine and such from the city and the water pressure reduced greatly and that caused the Drama droplets much heavier. Is there anything I can buy to increase the pressure besides removing the water filter ? Thanks
Click to expand...
Really No reason to use the chlorine filter. Remove it.
 
Chlorine in tap water is at pretty low concentrations. Low enough to not harm plants or animals. It's there for bacteria.

It will not accumulate to higher concentrations in soil. It will evaporate out of the water. The act of aerating the water via the dramm nozzle will help it evaporate out even quicker.

I let tap water sit in my carboys for a few days to breath so as to loose some of the chlorine before starting a batch of wine so it doesn't interfere with the yeast. Fresh out of the tap, your trees won't even notice it.
 
namnhi said:
I think everyone here thinking you put in the filter to filter out chlorine for your tree bur I believe you have the system for your house. Yes?
Click to expand...

If this is the case...and you're probably right...there are inline pump systems. But increasing pressure in a closed line will decrease output volume. You may need to play games with shrinking the output hose diameter or else the low pressure supply side won't have the volume to maintain the higher pressure.
 
If it is an in line filter as suggested, perhaps bypassing it for the outside water hose supply would be possible. Could be a bit of a plumbing headache though
 
So many variables...

Even basic things like increasing your hose diameter and using a shorter hose will have an impact. Do you know what your water supply pressure is at the street? Is the filter for all of your water or just your irrigation water?
 
namnhi said:
I think everyone here thinking you put in the filter to filter out chlorine for your tree bur I believe you have the system for your house. Yes?
Click to expand...
No...just for watering the plants lol.
 
Thanks everyone, I will remove it....It was recommended by another bonsai friend of mine to get it in first place but now I see that it makes no diff, there's no point having it and have the pressure stalled. Really appreciate it guys!
 
I have a Dramm wand too and with the small diameter hoses there just isn’t enough water flowing through the hose to work with the Dramm spray head. So I got one of the mist type heads from Stone Lantern and it does a great job. Just screw off the old head and screw the mist nozzle in its place.

stonelantern.com

Dramm Fog-it Nozzle for Bonsai Misting & Watering

Give your bonsai a healthy and cool treat. Almost all plants love to be watered with a fine mist. Particularly during times of stress. like after transplanting or when the weather is hot and dry. Made of solid brass. Outputs one gallon of water per minute. NOTE: This is the true Dramm Fog-it...
stonelantern.com stonelantern.com
 
I switched to a dramm nozzle with a lower hole count to fix this issue. If you're using the P1000 or whatever, try the 750 or even lower.
 
vp999 said:
Thanks everyone, I will remove it....It was recommended by another bonsai friend of mine to get it in first place but now I see that it makes no diff, there's no point having it and have the pressure stalled. Really appreciate it guys!
Click to expand...
Personally, I'd just ditch the Dramm and get a Masakuni or other Japanese watering wand. I know you will be able to get one at the Potomac Bonsai Assocation show at the Arb. in May (6-8) A number of vendors will likely have them. Or just get one off of Amazon.


FWIW, western watering wands are made to water flower pots, hanging baskets, etc. Fine flow doesn't really make a difference with them. I've had a Dram and a Haws (brass) watering wand--got them 10 years in. They always wound up washing soil off of my bonsai because the holes were too numerous and turned water flow into a dribble--unless I jacked up the water pressure and got 1,000 needles of water that blasted soil off too. I used them once gave them away to gardener friends and went back to a Masakuni/generic Japanese made "bonsai" wand. The Japanese wands are made for bonsai, not potted plants in baskets.
 
rockm said:
Personally, I'd just ditch the Dramm and get a Masakuni or other Japanese watering wand. I know you will be able to get one at the Potomac Bonsai Assocation show at the Arb. in May (6-8) A number of vendors will likely have them. Or just get one off of Amazon.


FWIW, western watering wands are made to water flower pots, hanging baskets, etc. Fine flow doesn't really make a difference with them. I've had a Dram and a Haws (brass) watering wand--got them 10 years in. They always wound up washing soil off of my bonsai because the holes were too numerous and turned water flow into a dribble--unless I jacked up the water pressure and got 1,000 needles of water that blasted soil off too. I used them once gave them away to gardener friends and went back to a Masakuni/generic Japanese made "bonsai" wand. The Japanese wands are made for bonsai, not potted plants in baskets.
Click to expand...
I have one are those but the wand is so short and I have to walk up close to every single tree so I didn't like it much lol. When you have to water close to 100 trees at various locations its a drag.
 
You must log in or register to reply here.

Similar threads

G
How to increase nebari (or even that big outside roots)
2
Replies
33
Views
4K
19Mateo83
19Mateo83
L
Defoliating top of JM to increase growth on lower branches
Replies
13
Views
1K
Forsoothe!
Forsoothe!
cheap_walmart_art
How to increase soil acidity for blueberry?
Replies
15
Views
3K
cheap_walmart_art
cheap_walmart_art
Mike Corazzi
What's the recommended way to increase juniper pad density?
2 3
Replies
47
Views
8K
Vance Wood
Vance Wood
A Random User
Increase Amount of Pics on Resources
Replies
7
Views
972
A Random User
A Random User
Back
Top Bottom